MOLYSLIP ARVINA SG3

MOLYSLIP ARVINA SG3 is a non-toxic, translucent, high temperature long-life grease based on polydimethylsiloxane with an inorganic thickener system. The product has a high dielectric strength and offers excellent resistance to washout by hot & cold water, steam, solvents, gases, chemicals, oils etc and is compatible with most commonly encountered rubbers and plastics.

MOLYSLIP ARVINA SG3 has been specially designed for the lubrication of seals & ‘O’ rings, valves, slides and slow moving plain and anti-friction bearings and lightly loaded mechanisms. It is WRAS approved for use in contact with both hot and cold potable water.

Note: Not suitable for use with silicone rubber

Excellent resistance to steam, solvents, gases, chemicals, oils etc

Outstanding resistance to washout by hot and cold water, including sea water in submerged conditions

Compatible with most commonly encountered rubbers and plastics

Prolonged wet film life extends re-lubrication intervals

Wide temperature capability from -40°C to +200°C (+220°C intermittent)

High dielectric strength

Highly effective protection against corrosion

WRAS approved for use in contact with hot and cold potable water (approval number 2009556)

MOLYSLIP ARVINA SG3 can be applied manually or via a grease gun/central lubricating system capable of pumping an NLGI 3 silicone grease.

As with all greases used for the first time, check compatibility with the grease used previously and if necessary remove and clean prior to application.

MOLYSLIP ARVINA SG3 should be stored in original, unopened packaging, out of direct sunlight at temperatures between 5°C and 35°C. The most up to date shelf life information for Molyslip products can be found on the certificate of analysis issued at the time of manufacture.